Shot Blasting Machine

    1. Rubber Belt Tumble Blast Machine

      The Q15GN and Q28GN rubber belt blasters are used to remove oxidized layer and other contaminants from surfaces of castings, forgings and weldments, and they are also applicable for other metal parts, such as aluminum castings, nonferrous parts, hard-to-clean work pieces, easy-to-tumble work pieces, castings with small cavity depth, non-brittle metal components, etc.
      The Q32 rubber belt blaster could clean ... >> Read More

    1. Spinner Hanger Shot Blasting Machine

      The blast cabinet body is formed by welding Q235 steel plate and profile steel together, and there are 2/3/4 QY360 blast wheels on one side of its wall to provide thorough cleaning for work pieces to be shot blasted.
      The blast cabinet is lined with 10-mm-thick ZCr5 steel panels, and these panels are connected together (overlap joint) by protective nuts to facilitate replacement when necessary. >> Read More

    1. Pass-Through Monorail Blast Machine

      On one side wall of the blast cabinet, there are 4-6 blast wheel assemblies, and their positions and angles are determined by computer-aided 3D dynamic simulation. In this way, work pieces will receive thorough surface cleaning with minimized dead zone.
      he abrasive reclamation system is made up of screw conveyor, bucket elevator, sand separator, pneumatic valve ... >> Read More

    1. Shot Blasting Machine with Overhead Conveyor

      For our shot blasting machine, there are totally 8 blast wheel assemblies in the blast cabinet, and applied blast wheel is manufactured on the basis of Japanese technology. These blast wheels are installed at fixed locations with proper angles as determined by 3D dynamic simulation, so work pieces will receive complete surface cleaning.
      This metal surface treatment ... >> Read More

    1. Overhead Rail Shot Blast MachineOur shot blasting machine is primarily used to deal with locomotive parts (swing bolster, side frame, coupler, coupler yoke, etc.), and it also fits for welded parts and small-sized components in batches.
      As a piece of complicated metal surface cleaning equipment, the overhead rail shot blast machine is constituted of several parts.
    1. Continuous Overhead Rail Shot Blast Machine

      The blast wheel assembly consists of blast wheel, turbine, bed plate and so on. For this overhead rail shot blast machine, Q034Z direct driven centrifugal blast wheel is utilized, and its location and angle are precisely calculated by computer-aided 3D dynamic simulation to provide thorough cleaning for metal surfaces. In addition, the blast wheel is housed inside an acoustic enclosure, but it allows ... >> Read More

    1. Rotary Table Shot Blast MachineThe work piece loading system is mainly composed of rotary table, perforated table plate, protective side plate, travelling wheel and drive mechanism, and the rotary table adopts a fully enclosed structure to protect speed reducer from being damaged by abrasives.
    1. Shot Blasting Machine for Steel Sheets and Profiles

      Endowed with drying tunnel, electrical heater, slat conveyor, draught fan and other parts, our paint drying system dries newly painted plates continuously as they are moving in the tunnel, thus making the paint in a touch dry or solid dry condition.
      This metal surface cleaning equipment makes use of a two-stage dedusting process ... >> Read More

    1. Shot Blasting Machine for Pipes

      Our pipe shot blasting machine fits for blast cleaning of steel pipes that are used to deliver tap water, natural gas, coal gas, petroleum and other media since it significantly improves surface condition of steel pipes.
      The shot blasting machine for pipes is available in bespoke configurations to better satisfy every customer, and the customizable list covers max. work piece size, number of ... >> Read More

    1. Wire Mesh Belt Shot Blast MachineThe horizontal wire mesh is manufactured from highly wear resistant manganese steel through special production process to extend its service life to as long as 3500-4000h, and it ensures that both upper and lower sides of metal parts are effectively cleaned in one step. In addition, the wire mesh belt conveyor is driven by a shaft-mounted speed reducer to realize stepless
    1. Roller Conveyor Shot Blast Machine for H Shaped Steel

      Composed of blast wheel, turbine, belt pulley, V-belt and bed plate, the blast wheel assemblies are installed on the side walls of blast cabinet, and there are 6 of them in total. Their position and angle are calculated by 3D dynamic simulation to offer full surface cleaning with minimized dead zone. When it comes to our roller conveyor shot blast machine, Q034 blast wheel is used, and it is a highly efficient product ... >> Read More

    1. Robotic Blasting MachineOur robotic abrasive blasting unit takes advantage of a PLC to effectively control every processing step so as to satisfy diverse production needs, and this PLC also feeds back processing data to make sure that every movement of the robot is conducted in a precise and smooth manner, thus realizing repeatable working.
    1. Barrel Blast MachineThis rotating barrel wheel blast machine makes its barrel rotate and swing when propelling abrasive media, so work pieces inside the barrel are tumbled sufficiently without part-to-part collision, thus realizing uniform coverage, short cleaning time and high working efficiency.
    1. Shot Blasting Machine for Coil SpringsMade from Q235 steel plates and steel profiles via welding, the blast chamber boasts superior strength and stiffness, and it has 6 access doors which are lined by high chromium steel plates and sealed by foamed rubber seal strips on four sides.
    1. Turntable Shot Blasting MachineOur shot blast machine is utilized for the surface cleaning of small to medium sized castings, forgings, weldments as well as metal parts that are flat, thin-walled or sensitive to shock, and it is particularly suitable for the surface peening of gears, shafts, springs, pull rods and heat treated components.

As a professional shot blasting machine manufacturer and supplier in China, KAITAI is aimed at providing best-fit shot blasting solutions as per ISO 14001:2004 Environmental Management System, ISO 18001 Occupational Health and Safety Management System and ISO 9001:2008 Quality Management System.

Product Catalog
Our shot blasting machine contains a wide range of choices, such as rubber belt tumble blast machine, spinner hanger shot blasting machine, pass-through monorail blast machine, robotic blasting machine, barrel blast machine, wire mesh belt shot blast machine, turntable shot blasting machine, shot blasting machine for pipes, shot blasting machine for coil springs, shot blasting machine for steel sheets and profiles, etc.

Due to its superior quality and stable performance, our abrasive blast equipment has passed CE certification, and it has been extensively utilized in many industries, like automobile, aerospace, rail transit, ship building, construction machinery, petrochemical engineering, etc.

For more details about shot blasting machine, please turn to corresponding pages or contact us directly.