Product List

Shandong KAITAI Shot Blasting Machinery Co., Ltd.

Add.: Qingyang Town, Zouping County, Shandong Province, China
Tel.: +86-543-4579616
Contact Person: Becky

Home » Products » Metal Abrasive » Steel Cut Wire Shot

Steel Cut Wire Shot

The steel cut wire shot is a metal shot available in four different sizes which are 1.0mm, 1.5mm, 2.0mm and 2.5mm, and it is manufactured according to SAE J441 and JB/T 8354-1996 standards. However, this abrasive shot is made from recycled steel wire, so its length may be a little different from standard value.

Technical Data
Name Steel cut wire shot
Chemical composition Carbon 0.45~0.75%
Manganese 0.40~1.20%
Silicon 0.10~0.30%
Sulfur <0.04%
Phosphorous <0.04%
Average hardness 1.0mm: 51~53HRC (525~561HV)
1.5mm: 41~45HRC (388~436HV)
Max. hardness deviation ±1.0HRC (±40HV)
Tensile strength 1.0mm: 1750~2150MPa
1.5mm: 1250~1450MPa
Microstructure Longitudinal: Uniformly deformed pearlite
Transverse: Uniformly deformed pearlite
Min. density (alcohol replace testing) 7. 8g/cm3

Application Range
Our steel cut wire shot suits for the following applications:
1. Surface cleaning: Castings, forgings, die-castings, steel plates, H-shaped steel, structural steel
2. Derusting and descaling: Castings, forgings, steel plates, H-shaped steel, structural steel
3. Surface strengthening: Gears, heat-treated parts
4. Shot blasting: Steel plates, steel profiles
5. Shot peening: Steel plates, steel profiles
6. Desanding: Steel plates, steel profiles
7. Pretreatment before painting: Steel plates, steel profiles, structural steel

Applicable Equipment
Our metal abrasive works well with shot blasting machine, shot peening machine, sand blasting machine, steel plate pretreatment line, etc.

The steel cut wire shot is packed in woven bags, paper bags, flexible freight bags, barrels or pallets.

Inquiry Form